#Molex microfit connector series

A connector passes the test if, during 30 seconds of applying a glowing wire, there is no ignition or any flames self-extinguish within 2 seconds. This test mandates that connectors carrying a current of 0.20A or higher must pass the glow wire test. Glow wire capable materials were designed to meet required EU regulations (IEC60335-1) for the home appliance market. TPA retainers help prevent failure in end products by reducing terminal back-out. The enhanced TPA design of Micro-Fit+ connectors provides stability and security for the terminals inside the receptacle. When assembling connectors, terminal back-outs may occur, resulting in end-product failure. Also allows for ease of work reducing operator fatigue during assembly. Micro-Fit+ connectors reduce mating force by 40% for more reliable assembly. Some applications have high mating cycles causing operator fatigue.

The Micro-Fit+ has a smaller PCB footprint, using less space than the Micro-Fit 3.0. Industries are challenged by space constraints in their applications. With its unique keying design, the Micro-Fit+ connectors offer up to 13.0A with a 3.00mm pitch to deliver high current capacity for different applications using the same amount of space that smaller connectors occupy. Their desire is to have this increased current without sacrificing the space small connectors occupy. The RMF contacts are available in 20 to 30 AWG.įor more information about the Micro-Fit 3.Some industries require more current for high-power equipment. The pre-lubricated version can be mated up to 250 times and fits into Micro-Fit 3.0 standard housings.

If applications are to be equipped with connectors that require lower insertion and withdrawal forces or tolerate frequent mating cycles for longer, the Micro-Fit 3.0 RMF contacts come into focus.

The pinhole-like shape ensures a reliable connection. In conjunction with the Micro-Fit 3.0 receptacle, it is possible to convert printed circuit boards easily from solder to press-fit applications.

The CPI specification of the Micro-Fit 3.0 connectors includes a spring-loaded press-fit pin interface while retaining all the features of the standard Micro-Fit 3.0 connector.

They are available in single-row with integrated secondary locking and double-row. Molex Micro-Fit TPA connectors prevent interference with end products.

It can only be closed when the contact is correctly positioned. Molexs Micro-Fit product family consists of 3.00mm pitch connectors with a maximum current rating of 5.0A available in.

A contact position assurance (TPA) feature reduces contact slippage by providing redundant locking. Molex Microfit 3.0 Connector Kit Molex Microfit 3.0 2 Pin (Vertical) connector for use with popular 3D printer electronics.

With Micro-Fit BMI (Blind Mate Interface), Molex provides blind-mateable cable-to-cable and cable-to-board connectors, with up to 2.54 mm tolerance to misalignment and self-alignment capability. This is time-consuming and can result in damage.

Especially in hard-to-reach applications, such as slide-in units or fan trays, connections must be able to be closed and opened without or with limited visual contact.

Its crimp termination method provides lasting protection for your connections, minimising the risk of loose wires and electrical interference. This Molex male connector housing acts as a protective containment shell for your wire-to-wire connections.

#Molex microfit connector series

To meet the diverse requirements of OEMs, for example, the Micro-Fit family from Molex offers the right connectors: Molex Micro-Fit 3.0 Male Connector Housing, 4 Way, 3mm Pitch - 43020 Series - 43020-0400. Fully insulated terminals protect against possible damage to the terminals during handling as well as mating and minimize the risk of short circuits due to debris.